The electromechanical machine designed for bending metal pipes and rolled by running cold. Can be used for bending: – steel water and gas pipes, gost 3262-75 (3 / 8''to 2'' wall thickness from 2,5 to 4,5 mm), grade of steel from the CT-3 to CT-45 – seamless steel pipe cold, gost 8734-75 (d 17 to 60 mm, wall thickness from 2 to 5 mm) , grade of steel from the CT-3 to CT-20 – hot-rolled seamless steel pipes, gost 8732-70 (d 17 to 60 mm, wall thickness from 2,5 to 5 mm), steel grade, any – of seamless cold and warm tubes of corrosion resistant (stainless) steel, gost 9941-81 (the outer diameter of 17 to 60 mm, wall thickness from 2 to 5 mm ), the brand became any gost 5632-72 – welded tubes from carbon and stainless steels, gost 10704-76, gost 11068-81 (d 25 to 60 mm wall thickness from 2,5 to 5 mm), grade of steel from the CT-3 to CT-20; 08Cr18Ni10Ti, 12X18H10T, 10X17H13M2T etc. – seamless tubes for engineering purposes according to tu 14-157-35-94 (d 25 to 60 mm wall thickness from 2,5 to 5 mm), steel grade, any of the CT-3 to CT-45 – boiler pipes tu 14-3-460-75 (d 17 to 60 mm wall thickness from 2 to 5 mm), steel grade 12H1MF, 20X – copper pipes gost 617-90 (d 17 to 60 mm, wall thickness from 2 to 5 mm) – brass tubes gost 494-90 (d 17 to 60 mm, wall thickness from 2 to 5 mm ) – shaped pipes gost 8639-57, gost 8645-57, (steel grade any of the CT-3 to CT-45, size 16 to 50 mm, wall thickness from 2) The main advantages of pipe bending machine: – the ability to control the machine in manual and automatic modes, and in automatic bending process is carried out with an electronic control for a given program – the machine is equipped with dynamic braking of the main drive – the possibility of using the machine at performing various bending operations, due to replacement of industrial equipment – the ability to control the machine from the console and elektropedali – machine requires no special training base, it is installed on any paved. Optional accessories are manufactured by all sizes of pipes with a diameter of 17 to 60 mm and wall thickness from 2 to 5 mm. On special order the machine is equipped with snap-bending of long products: – Round rolled gost 1414-75, (d 16 to 50 mm, steel grade each of CT-3 to CT-45) – Square rolled gost 1133-71 (size from 16 to 40 mm, steel grade, any of the ST-3 to ST-45) – a rectangular strip and rolled gost 4405-75, (size from 10 to 40 mm, steel grade, any of the CT-3 to CT-45). Machine provides high-quality bending blanks at a given angle of 180 with a minimal change in the geometry of the profile of non-crimp, fractures and other defects. Allows you to produce complex products with multiple pipes change in the orientation of planes of bending in the space, taking into account peculiarities of the relief structures (when going around the columns, pillars and other obstacles). In order to best meet the needs of our customers plant has the following services: – Advanced delivers: * set of replacement pads * spare parts for machinery – Produces commissioning – Produces training, gives advice on operating the machine – Performs repair and maintenance of supplied equipment.